Setting Up User Management; Enabling Department Management - Oki CX1145 MFP Admin Manual

7 TopAccess Administrator Mode

Setting up User Management

In the User Management tab page, you can enable or disable the department management,
configure the User Management Setting, and configure the User Authentication for Scan to E-
mail.
P.254 "Enabling Department Management"
P.256 "Setting up User Management Setting"
P.291 "Setting up User Authentication for Scan to E-mail"

Enabling Department Management

The department management is disabled as the default setting. When you want to manage the
counters for every department, enable the department management. If the department manage-
ment is enabled, the department code input screen will be displayed in the Touch Panel Display
when you perform copying, scanning, faxing, and e-Filing box operations to manage the opera-
tions separately every department. The printing can be also managed using the department
code.
To enable the department management, at least one department code must be registered.
Before enabling the department management, register the department code that you require.
P.249 "Registering or modifying the Department Code"
When you want to enable the User Management Setting, you do not have to enable the
Department Management first. The Department Management will be automatically enable
when the User Management Setting is enabled. However, no department code has been
registered, you cannot enable the User Management Setting. In that case, please register
the department code before enabling the User Management Setting.
Enabling or disabling the department management can be operated in the General sub-
menu page in the Setup menu page.
P.114 "Setting up the Device Information"
Enabling or disabling the department management can be operated using the Control Panel.
For instructions using the Control Panel, see User Functions Guide.
Enabling the department management
1
Click the User Management tab and the Authentication menu.
The login page is displayed.
2
Enter the administrator password and click [Login].
The Authentication page is displayed.
254

Setting up User Management