Oki CX1145 MFP Admin Manual page 201

7 TopAccess Administrator Mode
3
Click [New] to add a new Directory Service, or click the Directory
Service name link to edit the Directory Service properties.
The Directory Service Properties page is displayed.
4
Enter following items as required.
Directory Service Name — Enter the directory service name that identifies the directory
service.
Server IP Address — Enter the IP address or FQDN of the LDAP server.
Port Number — Enter the port number to access the LDAP server. Generally "389" port
is used to access the LDAP server without SSL. When the SSL is required, generally
"636" port is used to access the LDAP server.
Authentication — Select the authentication type for SASL. If you do not know the
authentication type, select "Auto".
Auto — Select this to access the LDAP server using the appropriate authentication
that this equipment detects.
Kerberos — Select this to access the LDAP server using the Kerberos authentica-
tion.
Digest-MD5 — Select this to access the LDAP server using the Digest-MD5 authen-
tication.
CRAM-MD5 — Select this to access the LDAP server using the CRAM-MD5 authen-
tication.
Login — Select this to access the LDAP server using the login authentication.
Plain — Select this to access the LDAP server using the plain authentication.
200 Maintaining from TopAccess