Oki CX1145 MFP Admin Manual page 125

7 TopAccess Administrator Mode
4) Manual
You assign the IPv6 address, prefix and default gateway manually. In this mode, you can
assign one IPv6 address to this equipment.
- IP ADDRESS — Assign the IPv6 address for this equipment.
- PREFIX — Assign the prefix for the IPv6 address.
- GATEWAY — Assign the default gateway.
- Use DHCPv6 Server for options — Select whether or not the optional information (IPv6
address for the DNS server, etc.) except the IPv6 address for this equipment, which is
issued from the DHCPv6 server is used on this equipment.
In "MANUAL" mode, can select neither "Use Stateful address" nor "Use Stateless address".
5) Use Stateless Address
Use the IPv6 addresses issued from routers.
Up to 7 IPv6 addresses can be obtained from routers. One IPv6 address can be obtained
from the DHCPv6 server. One link local address is also generated automatically.
When the "Use Stateless Address" option is selected, you cannot assign "IP Address",
"Prefix Length" and "Gateway".
If the selected IPv6 address is already assigned, DAD (Duplicate Address Detection)
detects it and notifies you on the control panel of this equipment.
- Keep Configuration(If router setting is changed) — Select the method on how to han-
dle IPv6 address data when new IPv6 address is provided from the same router provid-
ing the current IPv6 address to this equipment.
- Use DHCPv6 Server for IP Address(M frag) — Use the IPv6 address issued from the
DHCPv6 server in the stateless network environment.
- Use DHCPv6 Server for Options(O frag) — Use the optional information (IPv6 address
for the DNS server, etc.) issued from the DHCPv6 server in the stateless network envi-
ronment.
When the DHCP server does not have a primary and secondary DNS server addresses, the
blank data is set to in the primary and secondary DNS server addresses even if you set the
correct primary and secondary DNS server addresses manually in the DNS Session. In that
case, select "Disable" here and set the correct primary and secondary DNS server address
in the DNS Session.
P.128 "Setting up the DNS Session"
- IP Address — IPv6 addresses obtained from routers are displayed. Up to 7 IPv6
addresses can be retained.
When this equipment receives a router advertisement (RA) from a router, of which M flag
configuration is "0", the DHCPv6 function is disabled. If you change a router advertisement
(RA) M flag configuration from "0" to "1", it is required to reboot this equipment to enable the
DHCPv6 function.
124 Setting up from TopAccess