Oki CX1145 MFP Admin Manual page 306

Error Code
Failed to send E-Mail message
2C6A
Invalid address specified in From: field
2C6B
Invalid address specified in To: field
2C6C
NIC system error
2C6D
SMTP service is not available
2C70
SMTP authentication error
2C71
POP Before SMTP error
2C72
Failed to process received Email job
2C80
Failed to process received Fax job
2C81
2CC0 Job canceled
Power failure occurred
2CC1
Save as file
Illegal Job status
2D10, 2D12,
2D13,
2D20-2D22
Not enough memory for saving the scan
2D11 job
An internal error occurred
2D14
Exceeding maximum file capacity
2D15
Message Corrective Action
Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
Ask your administrator to check the SMTP
Authentication method or if there is an ille-
gal character in the Terminal mail address.
Set the correct SMTP Authentication
method or delete the illegal character in
the Terminal mail address.
Make sure that there is an illegal character
in the Destination mail address. Delete
the illegal character and reset the appro-
priate Destination mail address, then retry
it.
Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
Ask your administrator whether the SMTP
service is enabled.
Confirm the login name and password are
correct. If SSL is enabled, make sure that
SSL port number is correctly set.
Confirm the POP Before SMTP settings
and POP3 settings are correct.
Ask your administrator whether the Inter-
net Fax Received Forward is set.
Ask your administrator whether the Fax
Received Forward is set.
(Job was canceled.)
Make sure that the power cable is con-
nected properly and it is inserted securely.
Resend the job.
Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
Wait for a while and retry the job. If the
error still occurs, turn the power OFF and
then back ON and retry it.
Turn the power OFF and then back ON,
and retry the job. If the error still occurs,
contact your service representative.
Divide the file into several files, or retry in a
single-page format.
TopAccess Error Messages 305