Oki CX1145 MFP Admin Manual page 323

9 Appendix
10
Open the command prompt and execute the "netsh" command as
shown below.
If you log in to Windows Vista as a user without the administrator privilege, open the com-
mand prompt by right-clicking the icon and selecting "Run as administrator." This way,
you can temporarily have the administrator privilege to execute the command.
Using the thumbprint obtained in Step 9, type the following command:
netsh http add sslcert ipport=0.0.0.0:5358 certhash=(your 40-digit
thumbprint) appid={00112233-4455-6677-8899-AABBCCDDEEFF}
When inputting the thumbprint, exclude the spaces.
When your client certificate is created with Certificate Revocation List (CRL), you need to
check if the CA server is accessible by FQDN (See the following figure).
If no FQDN connection is established, ask your administrator to perform either of the fol-
lowing options:
In the "hosts" file accessible from the following folder path, add the IP address and
the host name:
C:\WINNT\system32\drivers\etc
Configure the DNS server to handle the name-to-address resolution.
322 Installing Certificates for a Client PC