Oki CX1145 MFP Admin Manual page 120

P.139 "Setting up the POP3 Network Service"
P.141 "Setting up the SNTP Service"
P.141 "Setting up the FTP Client"
P.142 "Setting up the FTP Server"
P.143 "Setting up the SNMP Network Service"
P.144 "Setting up the Security Service"
P.156 "Setting up the Web Service Setting"
4
Click [OK] to save the settings and close the sub window.
5
Click [Save].
The confirmation dialog box appears.
If you want to restore the current settings without saving the changes, click [Cancel].
Clicking [Cancel] cannot restore the defaults. This can only clear the changes and
restore the current settings before saving the changes.
6
Click [OK] to apply the changes.
This equipment starts initializing the network interface card to apply the changes
During the initialization of the network interface card, the network will not be available.
TopAccess will display "Please restart after waiting a few minutes." During the initializa-
tion, the Touch Panel Display will display "NETWORK INITIALIZING". When this mes-
sage disappears, TopAccess will once again be available.
Setting up from TopAccess 119