Oki CX1145 MFP Admin Manual page 152

3
Click [OK].
The server certificate is imported.
This message appears to inform you to input the password for the server certificate from
the touch panel of the equipment before saving the network settings.
4
Select "Import" and click [Previous] to close the Security Service
page.
5
Before enabling SSL, you must input the password for the imported
server certificate from the touch panel of the equipment.
For instructions on how to input the password, please refer to the following section in
User Functions Guide.
Chapter 4 "SETTING ITEMS (ADMIN)"
- "SETTING NETWORK FUNCTIONS"
- "Setting the User Certificate"
6
Then you can enable SSL for the following network settings.
P.135 "Setting up the HTTP Network Service"
P.142 "Setting up the FTP Server"
P.156 "Setting up the Web Service Setting"
P.184 "Setting up the IPP Print"
Setting up from TopAccess 151