Oki CX1145 MFP Admin Manual page 293

7 TopAccess Administrator Mode
3
Click [User Authentication for Scan to Email].
The User Authentication for Scan to Email page opens.
4
Select "SMTP" in the "Method" drop down box and click [Next].
This equipment can set the authentication for Scan to Email, but cannot set the
authentication for Internet Fax transmission. If you do not want to allow users to per-
form the Internet Fax transmission, check the "Internet Fax Not Allowed" check box.
When you check on this box, users no longer perform the Internet Fax transmission.
When you want to disable the User Authentication for Scan to Email, select "Disable"
in the "Method" and click [Next].
5
Enter the IP address or FQDN (Fully Qualified Domain Name) of the
SMTP server and select the authentication type in the "Authentica-
tion" drop down box. Then click [Next].
If you have set the SMTP Client settings in the Network setup page, the setting values of
the SMTP Client settings in the Network setup page are reflected in these settings.
292 Setting up User Management