Oki CX1145 MFP Admin Manual page 302

Error Code
SMTP server connection error
1C69
HOST NAME error
1C6A
Terminal mail address error
1C6B
Destination mail address error
1C6C
System error
1C6D
SMTP client OFF
1C70
SMTP authentication error
1C71
POP Before SMTP error
1C72
Internet Fax transmission failure when pro-
1C80
cessing E-mail job received
1C81 Onramp Gateway transmission failure
Internet Fax transmission failure when pro-
1C82
cessing Fax job received
Power failure
1CC1
MIME format error
3A10-3A12
3A20-3A22 Email process error
Partial Email timeout error
3A30
Invalid partial Email received
3A40
Cause
Ask your administrator to set the login
name or password of SMTP server and
perform the job again. Check if the SMTP
server is operating properly.
Ask your administrator to check if there is
an illegal character in the device name.
Delete the illegal character and reset the
appropriate device name.
Ask your administrator to check the SMTP
Authentication method or if there is an ille-
gal character in the Terminal mail
address.Set the correct SMTP Authentica-
tion method or delete the illegal character
in the Terminal mail address.
Check if there is an illegal character in the
Destination E-mail address. Delete the
illegal character and reset the appropriate
Destination E-mail address, then perform
the job again.
Turn the power OFF and then back ON.
Perform the job in error again. If the error
still occurs, contact your service represen-
tative.
Ask your administrator to enable the
SMTP Client and perform the job again.
Confirm the login name and password are
correct. If SSL is enabled, make sure that
SSL port number is correctly set.
Confirm the POP Before SMTP settings
and POP3 settings are correct.
Confirm the "Received Internet Fax For-
ward" settings.
Confirm the mail box settings.
Confirm the "Received Fax Forward" set-
ting.
Check if the power cable is connected
properly and it is inserted securely. Check
if the power voltage is unstable.
Ask the sender to resend the Email in the
MIME1.0 format.
Ask the sender to resend the Email.
Ask the sender to resend the Email, or
change the Partial Wait time setting.
Ask the sender to resend the partial Email
in the RFC2046 format.
Corrective Action
TopAccess Error Messages 301