Oki CX1145 MFP Admin Manual page 310

Error Code
Reached the maximum number of docu-
2BF1
ments.
2BF2 Reached the maximum number of folders.
RFC related
Syntax error, command unrecognized
2500
Syntax error in parameters or arguments
2501
Bad sequence of commands
2503
Command parameter not implemented
2504
Mailbox unavailable
2550
User not local
2551
Insufficient system storage
2552
Mailbox name not allowed
2553
Message Corrective Action
Delete the documents from the boxes or
folders.
Delete the folders from the boxes.
Check if the Terminal mail address and
Destination mail address are correct.
Check if the mail server is operating prop-
erly. Turn the power OFF and then back
ON. Perform the job in error again.
Check if the mail server is operating prop-
erly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error
still occurs, Contact your service represen-
tative.
Check if the mail server is operating prop-
erly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error
still occurs, Contact your service represen-
tative.
Check if the mail server is operating prop-
erly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error
still occurs, Contact your service represen-
tative.
Confirm that the destination Email
addresses are correct.
Confirm the access privilege for the mail-
box in the mail server.
Confirm that the destination Email
addresses are correct.
Check if the mail server is operating prop-
erly.
File is too large for mailbox. Confirm the
mailbox size on the mail server. Transmit
again in text mode or with a lower resolu-
tion. If the error still occurs, divide the doc-
ument and transmit again.
Check if there is an illegal character in the
mail box in the mail server.
TopAccess Error Messages 309