Oki CX1145 MFP Admin Manual page 303

Top access guide
Hide thumbs Also See for CX1145 MFP:
Table of Contents

Advertisement

8 Troubleshooting
Error Code
3A50-3A52
3A60-3A62
3A70
3A80-3A82
3B10-3B12
3B20-3B22
3B30-3B32
3B40-3B42
3C10-3C13
3C20-3C22
3C30-3C32
3C40-3C42
3C50-3C52
3C60-3C62
3C70
302
TopAccess Error Messages
Cause
HDD full error
HDD full alert
Interrupt partial Email reception
Partial Email disabled
Email format error
Context-Type error
Invalid character set
Email decode error
TIFF analysis error
TIFF compression error
TIFF resolution error
TIFF paper size error
Offramp transmission error
Offramp security error
Power failure
Corrective Action
Ask the sender to resend the Email by
separating it to several Emails. If this error
occurs because the paper empty occurs
and too much waiting jobs are stored in the
hard disk, add the paper to activate other
jobs.
Ask the sender to resend the Email by
separating it to several Emails. If this error
occurs because the paper empty occurs
and too much waiting jobs are stored in the
hard disk, add the paper to activate other
jobs.
Ask your administrator to enable the
Enable Partial Email setting and ask the
sender to resend the Email.
Ask your administrator to enable the
Enable Partial Email setting and ask the
sender to resend the Email.
Ask the sender to resend the Email.
Ask the sender to resend the Email with
attached files that are the TIFF format.
Ask the sender to resend the Email in the
ISO-8559-1/2 format.
Ask the sender to resend the Email.
Ask the sender to resend the Email with
attached files that are the TIFF format.
Ask the sender to resend the Email with
attached TIFF files in the MH, MR, MMR,
or JBIG compression.
Ask the sender to resend the Email with
attached TIFF files whose resolution is
either 200x100, 200x200, 200x400,
300x300, or 400x400 dpi.
Ask the sender to resend the Email with
attached TIFF files that can be printed on
the paper available for this equipment.
Ask the sender to specify the correct fax
numbers and resend the Email.
Confirm that specified fax numbers are
registered in the address book of the
equipment. If not, register the fax num-
bers in the address book and ask the
sender to resend the Email with correct fax
numbers.
Confirm the job is recovered or not. If not,
ask the sender to resend the Email.

Advertisement

Table of Contents
loading

Table of Contents