Oki CX1145 MFP Admin Manual page 131

7 TopAccess Administrator Mode
1
2
3
4
5
6
7
1) Enable DDNS
Select whether the dynamic DNS service is enabled or disabled.
2) Host Name
Enter the host name that will be added to the DNS server using DDNS.
3) Domain Name
Enter the domain name that will be added to the DNS server using DDNS.
When the "Obtain a Domain Name automatically" option (For IPv6, "Use DHCPv6 Server for
options"option) is enabled in the TCP/IP settings, the domain name can be obtained using
the DHCP server.
P.120 "Setting up the TCP/IP (IPv4)"
P.123 "Setting up the IPv6"
4) Primary Login Name
Enter the primary login name for the dynamic DNS service.
5) Primary Password
Enter the primary password for the dynamic DNS service.
6) Secondary Login Name
Enter the secondary login name for the dynamic DNS service.
7) Secondary Password
Enter the secondary password for the dynamic DNS service.
In the "DDNS Session" setting on TopAccess, when you change Primary Login Name, Pri-
mary Password, Secondary Login Name or Secondary Password, also change the corre-
sponding items, such as Host Name / Domain name in the "DDNS Session" setting or
Primary DNS Server Address / Secondary DNS Server Address in the "DNS Session" setting
in one go, or turn the power of the equipment OFF and then back ON, in order to make the
setting be reflected.
130 Setting up from TopAccess