Supplying Your Product License Code - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual

Replace ZENworks_Primary_Server_Address with the IP address or DNS name of the
Primary Server.
The ZENworks Control Center requires an https:// connection; requests to http:// are
redirected to https://.
When prompted for login credentials, use the Administrator user with the password you
provided during the installation.
After you are in the Control Center, you can click the Devices tab, then click the Servers
folder to view your ZENworks Primary Server.
12 After successfully installing the ZENworks Server components, take a reliable backup of the
following files:
/etc/opt/novell/zenworks/hibernate.cfg.xml
/etc/opt/novell/zenworks/tomcat/base/server.xml
/etc/opt/novell/zenworks/serversecret
13 (Conditional) Ensure that the ZENworks Linux Management server and the server on which
the Oracle or the PostgreSQL database is running are in time sync.
14 Continue with the next section,

5.3 Supplying Your Product License Code

Your ZENworks system is installed with a 90-day evaluation license. For your system to continue to
work after 90 days, you need to supply your product license. To do so:
1 Access the ZENworks Control Center using the following URL:
https://ZENworks_Primary_Server_Address
Replace ZENworks_Primary_Server_Address with the IP address or DNS name of the Primary
Server.
2 Click the Configuration tab.
The Licensing section is located in the lower right corner of the Configuration page. The
section displays the number of days remaining on the evaluation license.
3 Click Change to display the Product Activation box, provide your product license code, then
click OK.
4 To install a Secondary Server, continue with the next section,
Server.
or
To set up devices to be managed, skip to
page 53.
Supplying Your Product License
Section 7, "Setting Up Managed Devices," on
Code.
Installing a ZENworks Secondary
Installing the ZENworks Primary Server 45