Table of Contents
Advertisement
Upgrade K2 systems
Set up K2 Aurora FTP
Adding K2-Aurora FTP software role to K2 Media Server
4 October 2010
Prerequisites for this task are as follows:
If upgrading a K2 SAN, all SAN clients must be of ine (all media access stopped)
or shut down. Depending on your system design, this could include devices such
as K2 clients, K2 appliances, Aurora Proxy (Advanced) Encoders, MDI server,
Aurora Edit clients, Aurora Ingest clients, Aurora Playout clients, and generic
clients.
Upgrade your K2 systems to the compatible version of K2 system software. This
includes K2 SAN systems and stand-alone K2 Media Client and K2 Summit
Production Client systems. Refer to K2 Release Notes for procedures.
Do the following tasks if you use K2-Aurora FTP.
Use the following SiteCon g procedure to add the
Server that you use as your K2-Aurora FTP server, if you have not already done so.
The K2 Media Server that you use as your K2-Aurora FTP server must also have the
role of K2 FTP Server.
1. In the
Software Deployment | Devices
.
Add Role
The Add Role dialog box opens.
role to the K2 Media
K2-Aurora FTP
tree view, right-click the device and select
Aurora Edit Installation Guide
Managing Software
67
Advertisement
Table of Contents
