Table of Contents
Advertisement
Aurora Edit Security
You also need to add the pro le user to the Pro le Services group, and the
VibrintService user to the Vibrint Services group.
This table illustrates how users t into groups you previously de ned:
Group Name
Pro le Services
Vibrint Services
Editors
Configuring SNFS for SAN Security
The StorNext File System (SNFS) runs on the File System Manager(s) as part of the
SAN network. In order to use security on Aurora Edit workstations, you need to modify
the SNFS con guration to use Windows Security and then power cycle the FSMs.
NOTE: You cannot use the SNFS Con guration Tool to add Windows Security to SNFS.
Using the Con guration Tool changes other settings you don't want to modify
To add windows security to SNFS:
1. On the primary FSM, go to
2. Using Notepad, open the le <volumename>.cfg.
3. Change the
4. Save the le and exit Notepad.
5. Repeat these steps 1 through 4 on the backup FSM.
6. Power cycle the FSMs as follows:
Setting Security Permissions
The last step in setting up security for your DNP system is to set permissions for the
Aurora Edit folders and bins. You again use your security schema to determine
permissions for users and groups.
130
Aurora Edit Installation Guide
Windows Security
If the line item doesn't exist, add it to the le.
a) Shut down the backup FSM.
b) Reboot the primary FSM.
c) Power on the backup FSM
Users
pro le
VibrintService
Administrator
joe edit 1
joe edit 2
joe edit 3
joe producer
C:\SNFS\config.
line s value to
YES.
Required?
Yes
Yes
Optional
4 October 2010
Advertisement
Table of Contents
