Table of Contents
Advertisement
Distribute devices into deployment groups
Install prerequisite files on the control point PC
4 October 2010
You can gather devices of different types into a SiteCon g deployment group. This
allows you to deploy software to all the devices in the deployment group at the same
time, as part of the same deployment session. Based on the roles you have assigned
to the devices, SiteCon g deploys the proper software to each device. This increases
the ef ciency of your software deployment with SiteCon g.
If you have not already done so, con gure your deployment groups. The recommended
deployment group distribution is as follows. Depending on your system design, your
system might not have all the device types listed.
In a deployment group named "Aurora_Edit_Ingest_Playout", place the following
devices:
Aurora Edit workstation of any storage options: Shared storage, NAS storage,
and stand-alone.
Aurora Edit LD computer
DSM
Conform Server
SmartBin Server
FTP Server
Aurora Ingest Platform
IEP
Aurora Playout Platform
In a deployment group named "Aurora_Browse_MediaFrame", place the following
devices:
MediaFrame server
MDI server
Aurora Proxy Encoder
K2 Basecamp Express
If you have a K2 Nearline SAN (NAS), in a deployment group named for the SAN
system, place the following devices:
The Nearline SAN's K2 Media Servers.
Some software components, such as those for Aurora products, share common
prerequisite software. You must install a prerequisite software package on the control
point PC to make the prerequisite software available for software deployment to
devices.
Managing Software
Aurora Edit Installation Guide
65
Advertisement
Table of Contents
