Acl Ethernet Filter Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Command Reference Manual

Table 161 ACL Configuration Menu options
Command
reset
cur

ACL Ethernet Filter configuration

Command: /cfg/acl/acl <1-896>/ethernet
[Filtering Ethernet Menu]
This menu allows you to define Ethernet matching criteria for an ACL. The following table describes the
Ethernet Filter Configuration Menu options.
Table 162 Ethernet Filter Configuration Menu options
Command
smac <MAC address> <MAC mask>
dmac <MAC address> <MAC mask>
vlan <1-4095> <VLAN mask (0xfff)>
etype ARP|IP|IPv6|MPLS|RARP|any|0xXXXX
pri <0-7>
reset
cur
smac - Set to filter on source MAC
dmac - Set to filter on destination MAC
vlan - Set to filter on VLAN ID
etype - Set to filter on ethernet type
pri - Set to filter on priority
reset - Reset all fields
cur - Display current parameters
Description
Resets the ACL parameters to their default values and removes the
ACL from all ports to which it is assigned.
Displays the current ACL parameters.
Description
Defines the source MAC address and MAC mask for this
ACL. For example:
00:60:cf:40:56:00 ff:ff:ff:ff:ff:fc
Defines the destination MAC address and MAC mask for
this ACL. For example:
00:60:cf:40:56:00 ff:ff:ff:ff:ff:fc
Defines a VLAN number and mask for this ACL.
Defines the Ethernet type for this ACL.
Defines the Ethernet priority value for the ACL.
Resets Ethernet parameters for the ACL to their default
values.
Displays the current Ethernet parameters for the ACL.
Configuration Menu
176