Ospf Host Entry Configuration; Ospf Route Redistribution Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Manual

Table 134 OSPF Virtual Link Configuration commands
Command
no area-virtual-link <1-3> enable
no area-virtual-link <1-3>
show ip ospf area-virtual-link
<1-3>

OSPF Host Entry configuration

NOTE: OSPF commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes the OSPF Host Entry Configuration commands.
Table 135 OSPF Host Entry Configuration commands
Command
host <1-128> address <IP
address>
host <1-128> area <0-2>
host <1-128> cost <1-65535>
host <1-128> enable
no host <1-128> enable
no host <1-128>
show ip ospf host {<1-128>}

OSPF Route Redistribution configuration

NOTE: OSPF commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes the OSPF Route Redistribution Configuration commands.
Table 136 OSPF Route Redistribution Configuration commands
Command
redistribute
{fixed|static|rip} {<1-32>}
no redistribute
{fixed|static|rip} {<1-32>}
[no] redistribute
{fixed|static|rip} export
metric <1-16777215> metric-
type {type1|type2}
Description
Disables OSPF virtual link.
Command mode: Router OSPF
Deletes OSPF virtual link.
Command mode: Router OSPF
Displays the current OSPF virtual link settings.
Command mode: All except User EXEC
Description
Configures the base IP address for the host entry.
Command mode: Router OSPF
Configures the area index of the host.
Command mode: Router OSPF
Configures the cost value of the host.
Command mode: Router OSPF
Enables OSPF host entry.
Command mode: Router OSPF
Disables OSPF host entry.
Command mode: Router OSPF
Deletes OSPF host entry.
Command mode: Router OSPF
Displays the current OSPF host entries.
Command mode: All except User EXEC
Description
Adds selected routing maps to the rmap list.
This option adds a route map to the route redistribution list. The routes of the
redistribution protocol matched by the route maps in the route redistribution list
will be redistributed.
Command mode: Router OSPF
Removes the route map from the route redistribution list.
Removes routing maps from the
Command mode: Router OSPF
Exports the routes of this protocol as external OSPF AS-external LSAs in which
the metric and metric type are specified.
Command mode: Router OSPF
list.
rmap
Configuration Commands 121