Menus And Functions; Entering The User Settings Menu & Selecting An Option - Visonic PowerMaster-360R User Manual

Menus and functions

4. Menus and functions
This chapter explains the user programming features of your PowerMaster-360R system and allows you to tailor
the PowerMaster-360R system to your specific needs.
alarm system's control keys, numerical keypad and display.
contains the
The chapter is divided into two sections, as follows:
Part A – Describes how to enter or exit the User Settings menu and how to select the required options.
Part B – Describes how to execute the selected settings.
A.1 Entering the user settings menu & selecting an option
The following procedure describes how to enter and move within the user settings menu.
Detailed descriptions of the user settings options are provided at the end of the procedure.
To exit the user settings menu – see section A.2.

1. You can enter the "USER SETTINGS" menu only when the system is disarmed.
2. Carefully read the section titled "Additional information" according to the indicated references
see table at end of this section.
A. To enter the USER SETTINGS menu
1. READY 00:00
2. USER SETTINGS
ENTER CODE:
CODE
3.
SET BYPASS
B. To select an option
4. SET BYPASS
or
TIME & FORMAT
5.
Continue to the selected
setting option in B.1 - B.15
1
Display shown in disarm state when all zones are secured (00:00 or other digits show present time).
a. If you have not already changed your personal code number, use the default setting – 1111.
2
b. Master User has access to all User Settings options. Other users have access only to the Bypass options.
c. If you enter an invalid user code 3 - 5 times, the keypad will be automatically disabled for a pre-defined
period of time and the message WRONG PASSWORD will be displayed.
3
The bypass options will be displayed in the User Settings menu only if enabled by the installer. Otherwise, the
first User Settings option displayed will be [
16
Make sure the system is disarmed and then press the
repeatedly until the display reads [USER SETTINGS].
Press

The screen prompts you to enter your user code or present your proximity
tag.
Enter your User Code.
The display reads the first Setting option of the User Settings menu
[SET BYPASS].
Click the
option, for example, "TIME & FORMAT".
When the required setting option appears on the display, press the
button to enter the setting process.
The remainder of the procedures for the selected setting options is provided
in sections B.1 to B.15.
Additional information (section B.1)
USER CODES
All menu operations are performed using the Keypad which
2
3
or button until the display reads the required
].
D-307084 PowerMaster-360R User's Guide
etc. –
1
button
1