Audio Input Connections - Yamaha A4000 Owner's Manual

Audio Input Connections

This section explains how to connect the A5000/A4000 to a microphone, cassette recorder, or other sound
source.
• Be sure that power to the A5000/A4000 and to peripheral devices is OFF before making these
connections. Connecting devices while power is ON may result in damage to amps or speakers.
• Digital I/O connections are available only if the optional AIEB1 board is installed.
• To select the input to be used for recording, use the Input parameter on the RecData page (page
155).
Connecting to Analog Input
The following illustrations show how to connect to an analog input source, such as a microphone, analog
tape recorder, or analog synthesizer.
For monaural input
Microphone, etc.
Tape, recorder, synth, etc.
For stereo input
Microphone, etc.
Tape, recorder, synth, etc.
OUTPUT
OUTPUT
L R
A5000/A4000 Front Panel
INPUT
L R
Connect to INPUT L
A5000/A4000 Front Panel
INPUT
L R
Connect to INPUT L
A5000/A4000 Front Panel
INPUT
L R
A5000/A4000 Front Panel
INPUT
L R

Audio Input Connections

Chapter 1 Setting Up
A5000/A4000 •
23