Yamaha A4000 Owner's Manual page 147

Knob 1
[ Turn] Cursor Position/Page Selection
Positions the cursor to select a controller and selects dis-
play pages.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[ Turn] Device
Specifies the external MIDI controller from which control
change messages will be received, or the internal Pro-
gram LFO.
[Range] 000 — 120, AfterTouch, PitchBend, NoteNumber,
Velocity, ProgramLFO, KeyOnRandom
• 000 — 120 ... Specifies a MIDI control change
number for sample control.
• AfterTouch ... Keyboard aftertouch response will
be used for sample control.
• PitchBend ... Pitch bend data whill be used for
sample control.
• NoteNumber ... Note-on message note-on num-
bers will be used for sample control.
• Velocity ... Note-on message velocity data wil be
used for sample control.
• ProgramLFO ... Control/sample change data cre-
ated by the internal Program LFO is used for
sample control.
• KeyOnRandom ... A random control value is
generated each time a note-on message is
received.
• When a standard MIDI controller, such as "001/Mod-
Whel (modulation wheel) is selected, the standard
controller assignment wil also be displayed.
•
It is recommended that you do not use controller
numbers 000 and 032, as many MIDI devices use
these numbers for bank selection purposes.
[ Press] MIDI
When this knob is pressed the parameter can be directly
set by a MIDI note-on message received from an external
MIDI device.
Knob 3
[ Turn] Function
Specifies the sample function to be controlled from an
external MIDI controller or the Program LFO.
[Range]
Function
-----
Start Address
Level
Pan Bias
Pitch Bias
Portamento Rate/Time
Cutoff Bias
Cutoff Distance
Filter Q/Width
Filter Gain
AEG Attack Rate
AEG Decay Rate
AEG Sustain Level
AEG Release Rate
FEG Attack Rate
FEG Decay Rate
FEG Release Rate
FEG Init Level
FEG Sustain Level
FEG All Level
PEG Attack Rate
PEG Decay Rate
PEG Release Rate
PEG Init Level
PEG Sustain Level
LFO Speed
LFO Delay
Cutoff Mod Depth
Pitch Mod Depth
Amp Mod Depth
Pitch Bend
Control1 Range
Control2 Range
Control3 Range
Control4 Range
Control5 Range
Control6 Range
[ Press] Function List
Calls a list of the available functions.
A5000/A4000 •
EDIT-MIDI/CTRL
Control Target Page
—
Start address 120
Level 132
Pan bias 127
Pitch control
Portamento rate/time 130
Cutoff bias 134
Cutoff distance 134
Filter Q/width 134
Filter gain 134
AEG attack rate 137
AEG decay rate 137
AEG sustain level 137
AEG release rate 137
FEG attack rate 139
FEG decay rate 139
FEG release rate 139
FEG init level 139
FEG sustain level 139
FEG all level
PEG attack rate 140
PEG decay rate 141
PEG release rate 141
PEG init level 141
PEG sustain level 141
LFO speed 143
LFO delay 143
Cutoff modulation depth 144
Pitch modulation depth 144
Amplitude modulation depth 144
Pitch bend 145
Control 1 range 148
Control 2 range 148
Control 3 range 148
Control 4 range 148
Control 5 range 148
Control 6 range 148
147
Chapter 5 EDIT Mode