Sample Controller A & B; Smpctrla/B - Yamaha A4000 Owner's Manual

EDIT-MIDI/CTRL
Normal
Pitchbend Value Playback Pitch
127
Basic Pitch + PB Range
86
64
Basic Pitch
32
0 Basic Pitch - PB Range
Slow&Rev (Slow & Reverse)
Pitchbend Value Playback Pitch
127
Basic Pitch + PB Range
86
Basic Pitch
64
Almost stopped (Extremely low,
muddy sound, such as produced by
32
manually slowing a record-player
turntable to almost a full stop.)
0
Reverse play at basic pitch.
(Sample replay ends at wave-play
start address.)
Stop&Rev (Stop & Reverse)
Pitchbend Value Playback Pitch
127
Basic Pitch + PB Range
86
Almost stopped (Extremely low,
muddy sound, such as produced by
64
manually slowing a record-player
turntable to almost a full stop.)
32
Reverse play at basic pitch.
0 (Sample replay ends at wave-play
start address.)
Knob 3
[ Turn] Pitch Bend Range
This setting works together with the Pitch Bend Type
value (Knob 2) to determine the pitchbend range for the
pitchbend wheel.
To see how the pitch bend range will affect pitch, refer to
the pitch bend type diagrams accessible via Knob 2.
[Range] 0 — 24
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 4
[ Turn] Velocity Low Limit
Turn the knob to select the minimum velocity for note
replay. Whenever the A5000/A4000 receives a Note-On
message with a lower velocity, it will automatically raise
the velocity to the value given here.
[Range] 0 — 127
•
If this parameter is set to 50, for example, notes
received with a velocity lower than 50 will actually be
played at a velocity of 50.
[ Press] MIDI
When this knob is pressed the parameter can be directly
set by a MIDI note-on message received from an external
MIDI device.
146
Chapter 5 EDIT Mode
Slow
Pitchbend Value Playback Pitch
127
Basic Pitch + PB Range
86
64
Basic Pitch
32
Almost stopped (Extremely
low, muddy sound, such as
produced by manually slowing
0
a record-player turntable to
almost a full stop.)
Stop
Pitchbend Value Playback Pitch
127
Basic Pitch + PB Range
86
64
Almost stopped (Extremely
low, muddy sound, such as
32 produced by manually slowing
a record-player turntable to
almost a full stop.)
0
Up[A] Dwn[B] (UpA DownB)
Pitchbend Value Playback Pitch
127
Basic Pitch + x semitones
(or: Basic Pitch + z semitones)
86
64 Basic Pitch
32
0
Basic Pitch - y semitones
(or: Basic Pitch + z semitones)
• A5000/A4000
Knob 5
[ Turn] Velocity Offset
Use this value to apply an offset to all received velocities
— so as to raise or lower all velocities by the same
amount.
[Range] -127 — +127
• If you set the offset to -25, for example, then a Note-
On message with a velocity of 90 will be replayed at
a velocity of 65.
[ Press] QUICK...
Calls the quick entry menu (page 83).
[DISPLAY]
q
The selected pitch bend type will be shown diagramatically on the
left side of the display. For the Normal ... Stop&Rev settings, the
horizontal axis represents the pitch bend value and the vertical
axis represents pitch.
For Up[A] Dwn[B] settings the the pitch bend variation is shown in
relation to a keyboard diagram.
w
Received velocity (horizontal axis) versus resultant velocity (verti-
cal axis) in accordance with the Velocity Low Limit and Velocity Off-
set values is show on the right side of the display.
Sample Controller A & B
[EDIT] Button [F6] Button
"EDIT-SmpCtrlA" or "EDIT-SmpCtrlB"
Sample Controller A & B provides access to parameters relat-
ing to the device(s) use to control sample playback and other
functions.
Sample Controller A
Sample Controller B
Knob 1 Knob 2
Turn
Cursor/Page Device
action
Press
Tree View MIDI
action
Knob 1 to select
Knob 3 Knob 4 Knob 5
Sample
Control Range Type
Function
LIST... QUICK... —