Yamaha A4000 Owner's Manual page 209

Cursor q
Cursor
q
Knob 1 Knob 2
Turn
Cursor —
action
Press
EXEC —
action
Knob 1
[ Turn] Cursor
Positions the cursor.
[ Press] EXEC
Press this knob to call the save confirmation display.
Press Knob 5 (YES) to actually execute the save opera-
tion.
Knob 3
[ Turn] Save Type
Specifies the type of data to be saved.
[Range] All(Wipe), AllPrograms(Wipe), AllEdited,
AllSamples, OneProgram, OneSample,
OneSequence
• All(Wipe) ... Saves all memory content to disk.
This operation saves all objects currently in
memory (all usable programs, all samples, all
sample banks, and all sequences) to the desti-
nation volume on disk. The operation erases
all data already existing in the destination disk
volume. [Note: a program is usable if it uses at
least one sample or if its "AD In" setting is on.]
• AllPrograms(Wipe) ... Saves all usable programs,
together with all samples/sample banks used
by these programs, to the destination volume
on disk. Does not save any sequences. Saves
only those samples/sample banks that are
used with at least one program (does not save
unused samples).
This operation erases all data already existing
in the destination disk volume.
• AllEdited ... Saves all new data to disk (all new
and all edited objects that have not yet been
saved to disk in their current form). Does not
save objects that have not been changed
since the most recent disk load.
• AllSamples ... Saves all samples/sample banks
into the destination volume.
• OneProgram ... Saves the currently selected pro-
gram only, together with all samples/sample
banks used by that program.
Note that you can save the program into any
"program number" (001 to 128) on the destina-
tion side. Note also that the operation deletes
any program data already existing in the target
Knob 3 Knob 4 Knob 5
Save Type Volume —
— — EXEC&CONT
program number on the disk side (in the desti-
nation volume).
• OneSample ... Allows a single sample or sample
bank in memory to be saved.
• OneSequence ... Allows a single sequence in
memory to be saved.
Knob 4
[ Turn] Volume
Selects the destination volume.
Knob 5
[ Press] EXEC&CONT
Press this knob to call the save confirmation display.
Press Knob 5 (YES) to actually execute the save opera-
tion.
Cursor w
(when the SaveType is OneProgram)
Cursor
w
Knob 1 Knob 2
Turn From
Cursor
action Program
Press
EXEC —
action
Knob 1
Same function as Cursor
Knob 2
[ Turn] From Program
Selects the program to be saved.
[Range] 001 — 128
Knob 3
[ Turn] To Program
Selects the number of the destination program.
[Range] 001 — 128
Knob 4
[ Turn] Volume
Selects the destination volume.
Knob 5
Same function as Cursor
A5000/A4000 •
About the COMMANDS
Knob 3 Knob 4 Knob 5
To Program Volume —
— — EXEC&CONT
q
(page 209).
q
(page 209).
209
Chapter 9 COMMAND