Audio Output Connections - Yamaha A4000 Owner's Manual

Audio Output Connections

Audio Output Connections

This section explains how to connect the A5000/A4000 audio outputs to external devices.
• Be sure that power to the A5000/A4000 and to peripheral devices is OFF before making these
connections. Connecting devices while power is ON may result in damage to amps or speakers.
• Digital I/O connections are available only if the optional AIEB1 board is installed.
Connecting the Analog Outputs
The A5000/A4000 comes standard with the following stereo output jacks.
• STEREO OUT ...............Main analog output.
• ASSIGNABLE OUT.......You can set the jacks to operate independently of the STEREO OUT jacks, so
If you have installed the optional I/O expansion board (AIEB1 board), your A5000/A4000 will include
three additional ASSIGNABLE OUT pairs (ASSIGNABLE OUT jacks 1 to 6).
For monaural output:
A5000/A4000 Rear Panel
ASSIGNABLE OUT
For stereo output:
A5000/A4000 Rear Panel
ASSIGNABLE OUT
20
Chapter 1 Setting Up
that they output selected samples or programs only. The feature is useful, for
example, when you want to send the main signal to one audio device while
sending a specific sample to a different device. But it is also possible to set these
jacks so that they output the same signal as the STEREO OUT jacks. (page
195)
STEREO OUT
R L R L/MONO
STEREO OUT
R L R L/MONO
• A5000/A4000
Amp, mixer, etc.
INPUT
Amp, mixer, etc.
INPUT
L R