Yamaha A4000 Owner's Manual page 170

DISK-SAMPLE
Knob 3 — 5
Same function as Cursor
When a sample with the same name as one being loaded
exists in memory.
If you attempt to load a sample (or sequence) that has the
same name as one existing in memory, the following display
will appear.
The following functions are available from this display.
• Processing Mode
Turn this knob to select "One" or "All." When One is selected and
multiple samples are being loaded, this display will appear each time
a sample (or sequence) with a duplicate name is loaded. When All is
selected the same processing (the first processing applied) is
applied to all samples with duplicate names.
• Change the name of samples (or sequences) in memory.
Press Knob 2 (RENAME) to add an asterisk (*) to the names of sam-
ples (or sequences) in memory which have the same names as
those being loaded.
• Do not load samples (or sequences) with duplicate names.
Press Knob 3 (>SKIP).
• Overwrite samples (or sequences) in memory with loaded sam-
ples (or sequences) having duplicate names.
Press Knob 4 (>REPLACE).
• Abort the load operation.
Press Knob 5 (>ABORT). Data loaded prior to pressing the ABORT
knob will remain in memory.
170
Chapter 7 DISK Mode
q
(page 169).
• A5000/A4000