Yamaha A4000 Owner's Manual page 241

4.
Turn the A5000/A4000 SCSI terminator switch "ON."
• Set the CSCI terminator switch on the A5000/A4000 circuit board ("A" in the illustration, "TERM" on
the circuit board itself) to the "ON" position (the terminator is set to "ON" at the factory).
Terminator Switch
5.
Remove the four gold-colored screws holding the hard disk mount panel, and remove
the mount panel from the A5000/A4000.
Hard disk mount panel
6.
Attach the hard disk to the hard disk mount panel with the four hard disk installation
screws.
7.
Connect the SCSI cable (50-pin) and the power cable (long) to the hard disk unit.
• The connectors are "keyed" so that they cannot be inserted the wrong way around.
Power cable (long)
A
B
Hard disk installation screws
SCSI cable (50-pin)
Installing Optional Equipment
241
Appendix
A5000/A4000 •