Yamaha A4000 Owner's Manual page 243

10.
Install the hard disk and mount panel assembly in the A5000/A4000.
• Re-install the mount panel in its original location, attaching it with the 4 original screws. Be careful not to
catch the cables between the mount panel and mounting brackets when doing this.
11.
Secure the cables with the cable straps.
• Secure the connected power cable with the cable straps as shown in the illustration.
The SCSI hard disk is now fully installed.
There is no need to remove the disk when installing other devices.
12.
Replace the top cover (page 233).
13.
Plug in the power cord.
• After installing the hard disk, connect your audio and MIDI devices, and turn on the A5000/A4000.
Then mount the hard disk (page 173), format it (page 177), and partition it into volumes (page 172).
B
Important
Installing Optional Equipment
243
Appendix
A5000/A4000 •