Yamaha A4000 Owner's Manual page 223

Knob 5
[ Turn] Sample
Selects the sample to be processed.
[Range] All samples in memory.
[ Press] EXEC&CONT
Press this knob to call the resample confirmation display.
Press Knob 5 (YES) to actually execute the resample
operation.
w
Cursor
(when the Resample Type is TimeStretch (length),
TimeStretch (beat), or TimeStretch (time))
Cursor
w
Knob 1 Knob 2
Turn
Cursor —
action
Press
EXEC —
action
Knob 1
Same function as Cursor
Knob 2
[Display] From length / beat / time
Shows the original length, beat, or time values of the
sample. The display content will change according to the
selected Resample Type.
Knob 3
[ Turn] To length / beat / time
Specifies the length the sample is to be "stretched" to.
[Range] 1/4 — 4 times the original sample length.
• When this value is changed the Length%/Beat%/
Time% parameter (Knob 4) also changes.
• This parameter cannot be set so that as a result of
the time stretch operation mono samples are longer
than 32 megabytes or stereo samples are longer
than 64 megabytes.
Knob 4
[ Turn] length % / beat % / time %
Specifies the length of the time-stretched sample as a
percentage of the original sample length.
[Range] 25% — 400%
• When this value is changed the Length/Beat/Time
parameter (Knob 3) also changes.
[ Press] AUDITION
When this knob is pressed the results of the resample
operation with the current settings can be auditioned prior
to actually executing the resample operation.
Knob 3 Knob 4 Knob 5
To length / length% /
Accuracy
beat / time beat% / time%
— AUDITION EXEC&CONT
q
(page 222).
Knob 5
[ Turn] Accuracy
Time-stretch conversion does not produce perfect results,
and involves a tradeoff between sound and rhythm qual-
ity. This setting allows you to give priority to either sound
or rhythm quality when making the conversion.
[Range] sound4 — sound1, normal, rhythm1 — rhythm4
• sound4 — sound1 ... sound4 to give maximum
weight to sound quality.
• rhythm1 — rhythm4 ... rhythm4 to give maximum
weight to rhythm quality.
• normal ... normal for equal weight. Other values
are intermediate settings.
[ Press] EXEC&CONT
Press this knob to call the time stretch confirmation dis-
play. Press Knob 5 (YES) to actually execute the time
stretch operation.
w
Cursor
(when the Resample Type is TimeStretch(tempo))
Cursor
w
Knob 1 Knob 2
Turn
Cursor —
action
Press
EXEC CALC
action
Knob 1
Same function as Cursor
Knob 2
[Display] From Tempo
The upper line of the display shows the sample's original
loop tempo. The lower line shows the tempo of the
selected sample with the Pitch Coarse and Pitch Fine val-
ues applied.
• Easy Edit values are not applied.
[ Press] CALC
Press this knob to recalculate the loop tempo of the
selected sample.
Knob 3
[ Turn] To Tempo
Specifies the target tempo of the sample after time
stretch is applied.
[Range] 1/4 — 4 times the original loop tempo.
• This parameter cannot be set so that as a result of
the time stretch operation mono samples are longer
than 32 megabytes or stereo samples are longer
than 64 megabytes.
A5000/A4000 •
About the COMMANDS
Knob 3 Knob 4 Knob 5
To Tempo — Accuracy
— AUDITION EXEC&CONT
q
(page 222).
223
Chapter 9 COMMAND