Yamaha A4000 Owner's Manual page 48

ESSENTIAL PROCEDURES
2.
Select a Sample To Edit
If the sample you want to edit isn't already selected (the sample name appears at the bottom of the
window in the upper left corner of the display), press Knob 1 (TREE) to see a list of the available sam-
ples, use Knob 2 to select the desired sample, then press Knob 1 (PARAM) again to return to the
"EDIT-Fltr&EQ" display.
You can play the selected sample by pressing the [AUDITION] button.
3.
Set the Basic Filter Parameters
With the topmost function line on the display highlighted (use Knob 1 to select it if it isn't), use Knob
2 to select the type of filter response you want to use, Knob 3 to set the filter's cutoff frequency, Knob
4 to set the filter's bandwidth or resonance (the function of this parameter depends on the type of filter
selected - see chart below), and Knob 5 to set the "distance" between the filter frequencies in com-
pound filter types (also see the chart below). Your choices are as follows:
Bypass No filter.
LowPass1 A low-pass filter with a relatively gentle rolloff curve (12 dB/oct).
• Knob 4 (Q/Width) adjusts the gain of a resonant peak at the cutoff frequency.
• Knob 5 (Distance) has no effect with this filter type.
LowPass2 A low-pass filter with a steep cutoff (24 dB/oct).
• Knob 4 (Q/Width) adjusts the gain of a resonant peak at the cutoff frequency.
• Knob 5 (Distance) has no effect with this filter type.
LowPass3 A low-pass filter with a medium 18dB/oct cutoff.
• Knob 4 (Q/Width) adjusts the gain of a resonant peak at the cutoff frequency.
• Knob 5 (Distance) has no effect with this filter type.
HiPass1 A high-pass filter with a relatively gentle rolloff curve (12 dB/oct).
• Knob 4 (Q/Width) adjusts the gain of a resonant peak at the cutoff frequency.
• Knob 5 (Distance) has no effect with this filter type.
HiPass2 A high-pass filter with a steep cutoff (24 dB/oct).
• Knob 4 (Q/Width) adjusts the gain of a resonant peak at the cutoff frequency.
• Knob 5 (Distance) has no effect with this filter type.
48
Chapter 2 Sampler Basics & Essential Procedures
• A5000/A4000