The KVM switch connections are now complete.
TIPS:
When using multiple KVM switches, each switch can take input from the keyboard and mouse, but
they should be connected to the one serving the main display (as a rule, the one positioned at the
Nuage Master). Ensure that there are USB connections between that switch and the computers. In
this type of arrangement, you only need to use a KVM switch for that station; you can use less
expensive video switches for the other two stations. We currently do not recommend the use of
matrix KVM switches, as they do not accept independent screen-switching control from the Nuage
Fader/Master.
4-4. Audio connections
Connect audio devices in the following order:
Decide the I/O channel setup
Set aside the required cables
Make connections to output devices
44