Yamaha A4000 Owner's Manual page 53

2.
Select a Sample To Edit
If the sample you want to edit isn't already selected (the sample name appears at the bottom of the
window in the upper left corner of the display), press Knob 1 (TREE) to see a list of the available sam-
ples, use Knob 2 to select the desired sample, then press Knob 1 (PARAM) again to return to the
"EDIT-LFO" display.
You can play the selected sample by pressing the [AUDITION] button.
3.
Set the LFO Wave, Speed, Delay, & KeyOnSync Parameters
With the topmost function line of the display highlighted (use Knob 1 to select it if necessary), use
Knobs 2, 3, 4, and 5 to set the LFO waveform, speed, initial delay, and key synchronization as
required.
Chapter 2 Sampler Basics & Essential Procedures
A5000/A4000 •
ESSENTIAL PROCEDURES
53