Yamaha A4000 Owner's Manual page 180

7. DISK COMMANDS
4.
Use Knob 1 (EXEC) or Knob 5 (EXEC&CONT) to initiate execu-
tion. When the confirmation display appears, press Knob 5 (YES)
to execute the format operation.
• If Knob 1 (EXEC) is used to execute the command, the command
menu will be recalled after execution has finished. If Knob 5
(EXEC&CONT) is used to execute the command, the format dis-
play will be retained so you can continue and format other disks.
Cursor q
Cursor
q
Knob 1 Knob 2
Turn
Cursor —
action
Press
EXEC —
action
Knob 1
[ Turn] Cursor
Positions the cursor.
[ Press] EXEC (Execute)
Press this knob to call the format confirmation display.
Press Knob 5 (YES) to actually execute the format opera-
tion.
Knob 3
[ Turn] Format Type
Specifies the type of disk to be formatted and the type of
formatting to be applied.
[Range] Logical, Physical, OnePartition, FD(Quick), FD
(2HD), FD (2DD)
• OnePartition ... Reformats a single specified par-
tition on a previously formatted hard disk, ZIP
disk, or similar medium. Only logical format-
ting is performed, and other partitions are not
affected.
For information on the Logical, Physical, FD
(Quick), FD (2HD), and FD (2DD) options, refer to
pages 178 and 179, respectively.
Knob 4
[ Turn] Drive ID
Specifies the ID of the drive to be formattted.
When a drive ID is selected, the drive's manufacturer and
product number will appear immediately above the drive
ID.
[Range] SCSI 0 — SCSI 7 (SCSI 0 — 7),
IDE M (IDE Master), IDE S (IDE Slave)
Knob 5
[ Press] EXEC&CONT (Execute & Continue)
Press this knob to call the format confirmation display.
Press Knob 5 (YES) to actually execute the format opera-
tion.
180
Chapter 7 DISK Mode
Knob 3 Knob 4 Knob 5
Partition
Format Type Drive ID
Number
— — EXEC&CONT
• A5000/A4000
Cursor w
Cursor
w
Knob 1 Knob 2
Turn
Cursor —
action
Press
EXEC —
action
Knob 1
Same function as Cursor
Knob 3
[ Press] RENAME...
Calls the display which allows entering a name for a parti-
tion to be formatted. See page 81 for details on character
entry. During normal sampler operation the partition
name is handled and displayed as a disk name.
The partition name is shown in the "PartitionName" sec-
tion of the display.
Knob 5
Same function as Cursor
Knob 3 Knob 4 Knob 5
— — —
RANAME... — EXEC&CONT
q
(page 180).
q
(page 180).