Expand & Velocity Range; Exp&Vel - Yamaha A4000 Owner's Manual

Expand & Velocity Range
[EDIT] Button [F2] Button
"EDIT-Exp&Vel"
Use Expand page to create a more expansive sound for the
sample. This feature makes it possible to broaden the sound
of monaural samples, and to generate wider acoustics for your
stereo samples.
Use Velocity Range page to set the sample's velocity range,
and velocity crossfade.
q
Cursor (Expand)
Cursor
q
Knob 1 Knob 2
Turn Expand
Cursor/Page
action Detune
Press
Tree View QUICK...
action
Knob 1
[ Turn] Cursor/Page
Positions the cursor and selects display pages.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[ Turn] Expand Detune
This feature sets up a tuning differential (discord)
between left and right channels.
[Range] -7 — +7
• Positive values apply the differential in one direction,
while negative values apply it in the other. A setting
of 0 switches detuning off.
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 3
[ Turn] Expand Dephase
This feature sets up a differential in the playback start
address for each channel — resulting in a subtle phase
discord.
[Range] -63 — +63
• Positive values apply the differential in one direction,
while negative values apply it in the other. A setting
of 0 switches dephasing off.
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 1 to select
Knob 3 Knob 4 Knob 5
Expand
Expand Width —
Dephase
QUICK... QUICK... —
Knob 4
[ Turn] Expand Width
This parameter sets the sound's width.
[Range] -63 — +63
• Negative settings reverse the stereo image.
• A setting of +63 produces normal positioning for ste-
reo samples.
[ Press] QUICK...
Calls the quick entry menu (page 83).
w
Cursor (Velocity Range)
Cursor
w
Knob 1 Knob 2
Turn Velocity Low
Cursor/Page
action Crossfade
Press
Tree View QUICK...
action
Knob 1
Same function as Cursor
Knob 2
[ Turn] Velocity Low Crossfade
Determines how the sound fades at velocities below the
Velocity Low Range setting. The higher the value the
more abrupt the fade.
[Range] 0 — 127
• The higher the value, the lower the velocity at which
the sample will sound.
• The use of velocity crossfade allows you to blend
samples that are set for playback at different velocity
ranges, so that sound does not change drastically in
response to slight velocity changes near the range
limit.
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 3
[ Turn] Velocity Low Range
Turn the knob to set the minimum velocity required to pro-
duce sound from this sample.
[Range] 0 — Velocity High Range
[ Press] MIDI
When this knob is pressed the parameter can be directly
set by a MIDI note-on message received from an external
MIDI device.
A5000/A4000 •
EDIT-MAP/OUT
Knob 3 Knob 4 Knob 5
Velocity Low Velocity High Velocity High
Range Range Crossfade
MIDI MIDI QUICK...
q
(page 131).
131
Chapter 5 EDIT Mode