Midi Input - Yamaha A4000 Owner's Manual

3. Basic Operation
Paste the Previously Entered Name
Press Knob 1 to paste in the previously entered name. For example, if you previously entered the
name "SAMPLE ABC" and pressed Knob 5 to finish character entry, pressing Knob 1 will paste in
"SAMPLE ABC."
Insert a Space
Rotate Knob 1 to display "SPACE-IN" and then press Knob 1 to insert a space at the current cursor
location. All characters to the right of the new space will be moved to the right one character, accord-
ingly.
Delete a Character
Rotate Knob 1 to display "DELETE" and then press Knob 1 to delete the character at the current cur-
sor location. All characters to the right of the deleted character will be moved to the left one character,
accordingly.
Delete All Characters
Rotate Knob 1 to display "DELALL" and then press Knob 1 to delete all characters in the current
name.
Cancel Character Entry
To exit from the character entry display without entering a name press Knob 4.
Confirm and Finish Character Entry
To confirm and enter the new name and exit from the character entry display press Knob 5.

MIDI Input

Parameters such as MIDI channels, note numbers, velocities, etc. can be set either in the normal way or by
receiving an appropriate MIDI message from an external MIDI controller.
In the display shown below, for example, Knob 5 can be pressed to allow MIDI input. The "MIDI" label
will flash when the knob is pressed, indicating that the sampler is ready to receive MIDI input. When an
appropriate MIDI message is then received, the received MIDI channel, note number, velocity, or other data
is entered for the corresponding parameter. Press the knob a second time or select a different function to fin-
ish and exit from the MIDI input mode.
82
Chapter 3 The A5000/A4000 System & Features
• A5000/A4000