Yamaha A4000 Owner's Manual page 267

74: CONTROL DELAY(STEREO)
1 Delay Time 0.1ms — 740.0ms
2 Feedback Level -63 — +63
3 Feedback High Damp 0.1 — 1.0
4 Delay transition rate 1 — 48
5 Control Type Normal, Scratch
6 EQ Low Frequency 32Hz — 2.0kHz
7 EQ Low Gain -12dB — +12dB
8 EQ High Frequency 500Hz — 16.0kHz
9 EQ High Gain -12dB — +12dB
10 Dry/Wet Balance D63>W — D=W — D<W63
75: AMBIENCE
1 Dry/Wet Balance D63>W — D=W — D<W63
2 Delay Time 0.0ms — 50.0ms
3 Wet Output Phase normal/inverse
4 EQ Low Frequency 32Hz — 2.0kHz
5 EQ Low Gain -12dB — +12dB
6 EQ High Frequency 500Hz — 16.0kHz
7 EQ High Gain -12dB — +12dB
76: KARAOKE
1 Dry/Wet Balance D63>W — D=W — D<W63
2 Delay Time 0.1ms — 400.0ms
3 Feedback Level -63 — +63
4 HPF Cutoff Freq thru, 20Hz — 8.0kHz
5 LPF Cutoff Freq 1.0kHz — 18.0kHz, thru
77: EARLY REFLECTION
1 Dry/Wet Balance D63>W — D=W — D<W63
@2 Type S-hall, L-hall, random, reverse, plate, spring
3 Room Size 0.1 — 20.0
4 Diffusion 0 — 10
5 Initial Delay 0.1ms — 200.0ms
6 HPF Cutoff Freq thru, 22Hz — 8.0kHz
7 LPF Cutoff Freq 1.0kHz — 18.0kHz, thru
8 Liveness 0 — 10
9 Density 0 — 3
10 Feedback High Damp 0.1 — 1.0
11 Feedback Level -63 — +63
78: GATE REVERB, 79: REVERSE GATE
1 Dry/Wet Balance D63>W — D=W — D<W63
2 Type Type-A, Type-B
3 Room Size 0.1 — 20.0
4 Diffusion 0 — 10
5 Initial Delay 0.1ms — 200.0ms
6 HPF Cutoff Freq thru, 20Hz — 8.0kHz
7 LPF Cutoff Freq 1.0kHz — 18.0kHz, thru
8 Liveness 0 — 10
@9 Density 0 — 3
10 Feedback High Damp 0.1 — 1.0
11 Feedback Level -63 — +63
80: HALL — 83: PLATE
1 Dry/Wet Balance D63>W — D=W — D<W63
2 Reverb Time 0.3s — 30.0s
3 Diffusion 0 — 10
4 Initial Delay 0.1ms — 99.3ms
5 HPF Cutoff Freq thru, 20Hz — 8.0kHz
6 LPF Cutoff Freq 1.0kHz — 18.0kHz, thru
7 Reverb Delay 0.1ms — 99.3ms
@8 Density 0 — 4
9 ER/rev Balance E63>R — E=R — E<R63
10 Feedback High Damp 0.1 — 1.0
11 Feedback Level -63 — +63
84: WHITE ROOM — 87: CANYON
1 Dry/Wet Balance D63>W — D=W — D<W63
2 Reverb Time 0.3s — 30.0s
3 Diffusion 0 — 10
4 Initial Delay 0.1ms — 99.3ms
5 HPF Cutoff Freq thru, 20Hz — 8.0kHz
6 LPF Cutoff Freq 1.0kHz — 18.0kHz, thru
7 Width 0.5m — 10.2m
8 Height 0.5m — 20.2m
9 Depth 0.5m — 30.2m
10 Wall Vary 0 — 30
11 Reverb Delay 0.1ms — 99.3ms
@12 Density 0 — 4
13 ER/Rev Balance E63>R — E=R — E<R63
14 Feedback High Damp 0.1 — 1.0
15 Feedback Level -63 — +63
Delay time
Amount of feedback
High range attenuation (lower values cause the high range to decay faster)
Selects the speed of delay time variation
Normal or scratch type setting
Frequency at which the EQ will boost/cut the low range
Gain with which the EQ will boost/cut the low range
Frequency at which the EQ will boost/cut the high range
Gain with which the EQ will boost/cut the high range
Balance of the dry sound and effect sound
Balance of the dry sound and effect sound
Delay time
Inverts the left an right channel effect phase
Frequency at which the EQ will boost/cut the low range
Gain with which the EQ will boost/cut the low range
Frequency at which the EQ will boost/cut the high range
Gain with which the EQ will boost/cut the high range
Balance of the dry sound and effect sound
Sets the karaoke echo reflection time
Sets the number of reflections
Frequency at which the high pass filter will cut the low range
Adds character to the input low-pas filter
Balance of the dry sound and effect sound
Selects the type of early reflections
Sets the room size (higher values for longer reflections)
Sets the feeling of "width"
The delay before the early reflections begin
Frequency at which the high pass filter will cut the low range
Adds character to the input low-pas filter
Sets the ER decay (smaller values for faster decay)
Sets the density of the reflections (higher values for higher density)
Adjusts the high-frequency decay (smaller values for faster decay)
Amount of feedback
Balance of the dry sound and effect sound
Selects the type of early reflections
Sets the room size (higher values for longer reflections)
Sets the feeling of "width"
Sets the delay time until the GateReverb or ReverseGate begins
Frequency at which the high pass filter will cut the low range
Adds character to the input low-pas filter
Sets the ER decay (smaller values for faster decay)
Sets the density of the reflections (higher values for higher density)
High range attenuation (lower values cause the high range to decay faster)
Amount of feedback
Balance of the dry sound and effect sound
Reverb length
Spread of the reverb
Delay time until the early reflections
Frequency at which the high pass filter will cut the low range
Frequency at which the low pass filter will cut the high range
Delay time from the early reflections until the reverberation
Density of the reverberation
Level balance of the early reflections and the reverberation
High range attenuation (lower values cause the high range to decay faster)
Amount of feedback for the initial delay
Balance of the dry sound and effect sound
Reverb length
Spread of the reverb
Delay time until the early reflections
Frequency at which the high pass filter will cut the low range
Frequency at which the low pass filter will cut the high range
Width of the simulated room
Height of the simulated room
Depth of the simulated room
Wall surface of the simulated room (higher values produce more random reflections)
Delay time from the early reflections until the reverberation
Density of the reverberation
Level balance of the early reflections and the reverberation
High range attenuation (lower values cause the high range to decay faster)
Amount of feedback for the initial delay
Effect Parameter List
267
Appendix
A5000/A4000 •