Charge / Private Print Settings - Xerox 4112 System Administration Manual

8. S e tu ps
PJL Receive Command
Control
PJL Output Command
Control
Receive Control
8- 1 7 8
KEY POINT: The setting of Password Entry from Control
Panel applies to functions occurring on the machine. If you
are using CentreWare Internet Services (or other external
access), a password is ALWAYS required regardless of the
password settings on the machine. Furthermore, a password
may be required depending on authentication methods set on
the machine in System Settings.
NOTE: The system administrator password is also used to
change settings from CentreWare Internet Services.

Charge / Private Print Settings

Set how received print jobs should be handled.
Select Charge Print Settings.
1.
Select the item to be set, and select Change Settings.
2.
Set the setting value.
3.
4. Select Save.
Print jobs submitted by external equipment can be controlled by
PJL commands. The settings for Receive Control are applied
when either Off is selected or no PJL command is received.
Print jobs submitted by an external equipment can be controlled
by PJL commands.
When using the authentication feature, set how to handle print
jobs for which authentication failed (the print driver did not provide
the correct UserID, password, and other authentication
information).
For information about printing from a print driver, refer to Printing
on page 6-8.
Xe r o x 4112 /4 1 27 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e