Tray 5 (Bypass) - Paper Size Defaults - Xerox 4112 System Administration Manual

8. S e tu ps
8- 4 2
Select the priority sequence for this paper type.
3.
Select Save to save the setting and to return to the Paper
4.
Type Priority screen.
Select Close to return to the Paper Tray Settings screen.
5.

Tray 5 (Bypass) - Paper Size Defaults

This feature allows you to assign specific paper sizes to Tray 5.
This will facilitate easier copying when using Tray 5 (Bypass).
You can assign a maximum of twenty paper sizes to the Tray 5
(Bypass) size selections, which are listed 1-20.
To assign paper sizes to the Tray 5 buttons, perform the following
steps.
NOTE: If a nonstandard size paper is frequently used for copying,
set this feature to accommodate that paper size. This avoids
repeatedly selecting the paper dimensions each time you use that
nonstandard paper for copying. This feature also allows you to set
commonly used paper sizes in the descending order shown on the
screen below; this provides ease and quickness in selecting the
desired paper size when copying jobs. For example, if you
frequently use 12 x 18 inch (304.8 x 457.2 mm) paper, you can set
Item 1 for that paper size.
Xe r o x 4112 /4 1 27 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e