Auto Power Saver / Energy - Xerox 4112 System Administration Manual

X er o x 4 112 /4 1 27 C o pi e r /P r i n te r S y s te m A d mi n i st r a ti o n G u id e

Auto Power Saver / Energy

In power saving mode, there is a "low-power mode" and a "sleep
mode," and when the set time has elapsed, the following occurs:
Last operation on the machine
1. From the Machine Clock/Timers screen, select Auto Power
Saver / Energy, and select Change Settings.
Set low-power mode and sleep mode.
2.
From Last Selection to Low Power Mode: Set the time
•
to go from last operation to low-power mode. Set the time
from 1 to 240 minutes, in 1 minute increments.
NOTE: The time From Last Operation to Low-power Mode
must not exceed the time From Last Operation to Sleep
Mode.
• From Last Selection to Sleep mode: .
8 . S e t ups
Low-power mode Sleep mode
8-15