Xerox 4112 System Administration Manual page 79

X er o x 4 112 /4 1 27 C o pi e r /P r i n te r S y s t em A d m i ni s tr at i on G u i d e
Select the Enable checkbox to enable the Print Error.
12.
Select the Enable checkbox to enable the Response to Read
13.
Status (MDN).
NOTE: Set this item when using the mail print feature.
Click + on the left of Connectivity and + on the left of
14.
Protocols to display the items in the folder.
Click POP3 Setup.
15.
Set the POP3 server information.
16.
NOTE: Set this item when using the mail print feature and
POP3 is specified for the Receive Protocol.
a. Set the POP3 Server Address, POP3 Port Number, and
POP Receiving Authentication.
b. Set the POP3 Server Check Interval.
c. Set the POP User Name.
d. Enter the POP User Password.
Set the mail exchange restrictions.
17.
NOTE: Set this item when using the mail print feature.
a. From the Domain Filtering drop-down menu, select either
Off, Allow Domains, or Block Domains.
b. Click Edit button.
c. If you selected Allow Domains, specify the domain names
that will be allowed by the machine.
If you selected Block Domains, specify the domain
names that will be blocked by the machine.
d. Click the Apply New Settings.
e. Click the Back button until the E-Mail Settings screen is
displayed.
3 . Us i ng Ce nt r eWa r e I nt er n e t Se r v i c e s
3-31