Xerox 4112 System Administration Manual page 158

8. S e tu ps
Control Panel Select Tone
Control Panel Alert Tone
Base Tone
Machine Ready Tone
Copy Job Complete Tone
Non-Copy Job Complete
Fault Tone
Auto Clear Alert Tone
Alert Tone
Out of Paper Warning Tone
Low Toner Alert Tone
8- 1 8
Select Save.
5.
Select the volume level that sounds when a button displayed on
the screen is correctly selected. Select from Loud, Normal, and
Soft. To disable the sound, select Off.
Select the volume level that sounds when a non-functioning (or
grayed-out) button is selected or when an error occurs. Select
from Loud, Normal, and Soft. To disable the sound, select Off.
For a button that toggles (the setting changes each time it is
pressed), select the volume level that sounds when the button is in
its initial (first) position. This is the sound made when the Interrupt
button is released. Select from Loud, Normal, and Soft. To
disable the sound, select Off.
Set the volume level that sounds when the machine is ready to
copy or print or after the machine powers on. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Select the volume level that sounds when the machine
successfully completes the copy cycle. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Select the volume level that sounds when the machine completes
a job other than a copy job. Select from Loud, Normal, and Soft.
Tone
To disable the sound, select Off.
Select the volume level that sounds when there is an error
termination. Select from Loud, Normal, and Soft. To disable the
sound, select Off.
Select the volume level that sounds when the automatic clear
feature is enabled and it is 5 seconds before the machine
automatically returns to the initial screen. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Select the volume level that sounds when a fault, such as a paper
jam occurs, and the fault is left unattended. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Select the volume level that sounds when there is no paper in the
paper tray and the job is left unattended. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Select the volume level that sounds when it is time to replace the
drum toner cartridge. Select from Loud, Normal, and Low. To
disable the sound, select Off.
Xe r o x 4112 /4 1 27 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e