Product Overview; Symbols Used In This Guide - Xerox 4112 System Administration Manual

Symbols used in this guide

X er o x 4 112 /4 1 27 C o pi e r /P r i n te r S y s t em A d m i ni s tr at i on G u i d e
1.

Product Overview

KEY POINT: The User Interface (UI) screens shown in this guide
may or may not reflect the screens displayed on your system. The
UI screens vary from system to system and from marketplace to
marketplace. Therefore, the UI screens in this guide are a
representation of the type of screens that may be seen on your
particular system.
CAUTION: This symbol alerts you to an action that may cause
damage to hardware, software, or result in the loss of data.
WARNING: Warnings mark alert users to areas of the machine
where there is a possibility of personal injury.
WARNING: This symbol identifies an area on the machine that is
HOT and should not be touched.
WARNING: This symbol indicates a laser is being used in the
machine and alerts you to refer to the appropriate safety
information.
KEY POINT: This symbol identifies information that is being
emphasized and is important for you to remember.
The 1 2 3... symbol indicates the beginning of a task or work
process you should use to complete a procedure and is followed
by the first step of a numbered procedure, task, or work process.
NOTE: This symbol calls your attention to information that is
helpful, but not essential to complete a procedure or task.
This symbol indicates that there is additional information from
another source, such as a web site or manual.
1-1