Xerox 4112 System Administration Manual page 267

Color Scanning
(with optional Color
Scanner kit only)
Original Type
File Format
File Format
(with optional Color
Scanner kit only)
Lighten/Darken
Contrast
(with optional Color
Scanner kit only)
Sharpness
Auto Exposure
X er o x 4 112 /4 1 27 C o pi e r /P r i n te r S y s te m A d mi n i st r a ti o n G u id e
NOTE: If you have the optional color scanner, some of the
selections will be different as noted below.
Select the item to be set or changed, and select Change
2.
Settings.
NOTE: Select s to display the previous screen and select t to
display the next screen.
Select the default setting for that item.
3.
Select Save; you are returned to the Scan Defaults screen.
4.
Repeat Steps 1-4 for the remaining Scan Defaults features.
5.
Upon completion, select Close; you are returned to the Scan
6.
Mode Settings screen.
Select the default value for Color Scanning in the Basic Scanning
Tab screen. With the optional color scanner, select one of the
following: Auto Detect, Color, Grayscale, or Black & White.
Select the default value for Original Type in the Basic Scanning
Tab screen. Select one of the following: Text & Photo, Text, or
Photo.
Select the default value for FIle Format feature (as displayed on
the Basic Scanning Tab screen). Select one of the
following: TIFF, Single-page TIFF, or PDF.
Select the default value for FIle Format feature (as displayed on
the Basic Scanning Tab screen). With the optional color scanner,
select one of the following: TIFF/JPEG Auto Select, Multi-page
TIFF, Single-page TIFF, or PDF.
Select the default value for Lighten/Darken/Contrast (as
displayed on the Lighten/Darken feature on the Image Quality
screen). Select one of the following: Lighter (+3), Lighter (+2),
Lighter (+1), Normal, Darker (+1), Darker (+2), or Darker (+3).
Select the default value for Contrast (as displayed on the Image
Quality screen). With the optional color scanner, select one of the
following: Higher, High, Normal, Low, or Lower.
Select the default value for Sharpness (as displayed on the
Image Quality screen). Select one of the following: Sharper,
Sharp, Normal, Soft, or Softer.
Select the default value for Auto Exposure (as displayed on the
Image Quality screen). Select either Off or On.
8 . S e t ups
8-127