Xerox 4112 System Administration Manual page 239

Pseudo-Photo Gradation
Original Type - See -
Through Paper
Output Orientation-Reverse
Output Orientation-Auto
(Single sheet)
Annotations - Edit
Comment 1 through 8
Bates Stamp - Edit Prefix 1
through 8
Maximum Number of Sets
Reading Order Options
X er o x 4 112 /4 1 27 C o pi e r /P r i n te r S y s te m A d mi n i st r a ti o n G u id e
Use the following procedure to select a default fine tune setting.
Select Fine-tune 100%, and select Change Settings.
1.
Enter the desired fine-tune value by using s, t,
2.
Select Save to save the changes and return to the Copy
3.
Control screen.
Select the default toning method for photo originals. To obtain an
image quality that is closer to the photo image, select how gray
Mode
tones will be handled by the machine. Select either Error
Diffusion or Dither.
Select the default setting for See - Through Paper. The selection
made here is displayed on the Image Quality screen, Original
Type feature. Select either Enabled or Disabled.
Select whether or not Reverse Order is enabled for the delivery of
the copy or print output. If Enabled is selected, Face Up,
Order
Reverse Order is displayed on the Output Orientation screen
(Output Format tab).
Select the default setting for delivering the copy or print
output. This default setting is displayed on the Output
Orientation screen (Output Format tab). Select either Face Up
or Face Down. The setting selected here is the default delivery
method when the Auto feature is selected on the Output
Orientation screen (Output Format tab).
Select Allow or Do Not Allow.
Select Allow or Do Not Allow.
Select 1 through 9999.
Select Hide Reading Order or Show Reading Order.
8 . S e t ups
, and .
8-99