Charge Print Settings - Xerox CopyCentre C123 User Manual

[Failed Access Log] Screen
With this feature enabled, the machine records an error when the number of
authentication failures exceeds the selected number within a certain period.
1.
Select [Failed Access Log] on
the [User Details Setup] screen.
2.
Select [On] to enable the
feature.
Failed Attempts
Use the numeric keypad on the control panel to select the maximum number of
authentication failures to be allowed.

Charge Print Settings

This feature allows you to specify how to treat the print jobs that are received when the
machine is in the Auditron Administration mode.
1.
Select [Charge Print Settings]
on the [Login Setup/Auditron
Administration] screen.
2.
Perform the necessary
operations.
3.
Select [Close].
Receive Control
Allows you to specify the receiving control for externally submitted jobs.
• According to Print Auditron – The receiving control depends on the setting made on
the machine. The [Job Login Failure] options are displayed.
• Save All – Saves all jobs to be received.
• Job Login Failure – Specifies how to treat the print jobs with a user ID or password
authentication failure. If you select [Save All], all jobs are saved. If you select [Cancel
Job], job receipt will be rejected.
• Job without User ID – Specifies how to treat the jobs without a user ID. If you select
[Save All], all jobs are saved. If you select [Cancel Job], job receipt will be rejected.
Document Expiry Date
Allows you to specify the storage period for the authenticated print jobs.
• Documents kept for – Specify the storage period within the range of 1–14 days.
• Documents deleted at – Specify the time to delete jobs when storage period expires.
You can set the time in the ranges of 0–23 hours and 0–59 minutes.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide
Login Setup/Auditron Administration
259