Xerox 4112 System Administration Manual page 102

5. U s i ng t h e S c an S e r v i ce
5- 1 4
Enable the Internet service (HTTP) port as above.
4.
Select Close.
5.
If necessary, set the IP Address (Chapter 1 Setting the IP
6.
address. on page 1-17).
Select Close repeatedly until the System Settings screen is
7.
displayed.
Exit the System Administrator Mode (Chapter 1 Exiting the
8.
System Administrator Mode on page 1-16).
After the machine is restarted, print out the Printer Settings
9.
List to confirm that the SOAP port is enabled and the IP
addresses are configured.
Xe r o x 4112 /4 1 27 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e