Xerox 4112 System Administration Manual page 60

3. U s i ng C e nt r eWa r e I nt er n e t S er v i c e s
3- 1 2
Set the Subnet Mask and Gateway Address.
8.
NOTE: This item is not necessary if either DHCP, BOOTP,
RARP, or DHCP/Autonet has been selected from the Get IP
Address pull-down menu.
Set the DNS information.
9.
a. Select the check box if using DHCP for Obtain DNS
Server Address Automatically.
b. Set the DNS Address 1 to 3.
NOTE: This item is not necessary if DHCP has been
specified for the Get the DNS Server Address.
c. Set the DNS Name.
d. Select the On check box when using the Generate
Domain Search List Automatically.
e. Set the Domain Name 1 to 3.
f. Set the Connection Timeout.
g. Select the On check box to enable the DNS Dynamic
Update.
Reflect the values as the machine's setting values.
10.
a. Click the Apply New Settings. A screen to enter the user
name and password will be displayed.
b. Enter the System Administrator UserID and password into
User Name and Password, and then click OK.
NOTE: The default User ID value is 11111 and password is
x-admin.
c. The right frame on the web browser will change to the
machine reboot display.
d. Click Reboot. The machine will reboot and the setting
value will be reflected.
Xe r o x 4112 /4 1 27 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e