Unlocking The Bezel; Removing The Access Panel - HP ProLiant ML310 Generation 3 User Manual
Hide thumbs
Also See for ProLiant ML310 Generation 3:
- Setup and installation manual (170 pages) ,
- User manual (124 pages) ,
- Maintenance and service manual (90 pages)
Table of Contents
Advertisement
22
HP ProLiant ML310 Generation 3 Server User Guide
Unlocking the bezel
The removable bezel must be unlocked and opened before accessing the hard
drive cage and before removing the access panel. The bezel must remain closed
during normal server operations.
If necessary, remove the bezel.
Removing the access panel
1. Power down the server ("Powering down the server" on page 21).
2. Open the bezel ("Unlocking the bezel" on page 22).
3. Loosen the two thumbscrews.
4. Slide the access panel toward the rear of the server and remove from the
server.
WARNING: To reduce the risk of personal injury from hot
surfaces, allow the drives and the internal system components to
cool before touching them.
CAUTION: Do not operate the server for long periods with the
access panel open or removed. Operating the server in this manner
results in improper airflow and improper cooling that can lead to thermal
damage.
Advertisement
Table of Contents
