601-Diskette Controller Error; 602-Diskette Boot Record Error - HP ProLiant Troubleshooting Manual

Run Insight Diagnostics
2.
indicated.
400 Series
40X-Parallel Port X Address Assignment Conflict
Audible Beeps: 2 short
Possible Cause: Both external and internal ports are assigned to parallel port X.
Action: Run the server setup utility and correct the configuration.
404-Parallel Port Address Conflict Detected...
...A hardware conflict in your system is keeping some system components from working correctly. If you have
recently added new hardware remove it to see if it is the cause of the conflict. Alternatively, use Computer Setup or
your operating system to insure that no conflicts exist.
Audible Beeps: 2 short
Possible Cause: A hardware conflict in the system is preventing the parallel port from working correctly.
Action:
If you have recently added new hardware, remove it to see if the hardware is the cause of the
1.
conflict.
Run the server setup utility to reassign resources for the parallel port and manually resolve the
2.
resource conflict.
Run Insight Diagnostics
3.
indicated.
600 Series

601-Diskette Controller Error

Audible Beeps: None
Possible Cause: Diskette controller circuitry failure occurred.
Action:
Be sure the diskette drive cables are connected.
1.
Replace the diskette drive, the cable, or both.
2.
Run Insight Diagnostics
3.
indicated.

602-Diskette Boot Record Error

Audible Beeps: None
Possible Cause: The boot sector on the boot disk is corrupt.
Action:
Remove the diskette from the diskette drive.
1.
("HP Insight Diagnostics" on page 75) and replace failed components as
("HP Insight Diagnostics" on page 75) and replace failed components as
("HP Insight Diagnostics" on page 75) and replace failed components as