Mismatch Jam - Minolta MAGICOLOR 3100 User Manual

d
Close the chute assembly.
e
Repeat for all media trays, if necessary.
6
Slide the tray(s) back into the printer.
7
Close the front cover.

Mismatch Jam

A MISMATCH JAM
detects the wrong media type.
1
Open the front cover (button A)
c,d.
2
Remove the jammed media.
Remove any torn pieces of media
still in the printer.
Attention
Be careful not to touch the
transfer drum while removing
jammed media.
3
If the jam message is still dis-
played, slide open and remove each
media tray.
a
Release the two hooks securing
the chute assembly c inside the
tray compartment.
b
Turn the chute assembly 90
degrees toward the rear of the
printer.
Remove the jammed media d.
c
d
Close the chute assembly.
e
Repeat for all media trays, if necessary.
6
Slide the tray(s) back into the printer.
7
Close the front cover.
78
may occur if the transparency sensor in the printer
1
2
1
2
Clearing Media Jams