Minolta MAGICOLOR 3100 User Manual page 119

Installation
Attention
It's very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 109. In addition,
always handle circuit boards by the edges only.
1
If you are not to the point when you are able to print an advanced status
page (with the control panel's Print Status? button) yet, skip to step 2.
If you have previously installed your printer and have confirmed that it is
printing, print an advanced status page in case you need to restore any
current memory settings after the DIMM installation.
5 "
2
Turn off the printer and disconnect the power cord and all interface
cables.
Dual In-Line Memory Modules (DIMMs)
Installing DIMMs automatically restores memory defaults. If your
memory settings are specific to your environment, print an
advanced status page before installing DIMMs, so you can recover
the current memory settings.
113